Are Automatic Door Sensors Compliant with EN 16005 or ANSI Standards?

Automatic doors are a vital part of modern building design, offering convenience, accessibility, and efficiency for a wide range of environments. However, alongside performance, safety and regulatory compliance are critical. For businesses operating internationally, two key standards frequently come into discussion: EN 16005 in Europe and ANSI standards in the United States.

So, the question arises — are automatic door sensors compliant with these standards?

Understanding EN 16005 and ANSI Standards

EN 16005 – European Safety Standard

EN 16005 is a European norm that specifies the safety requirements for the use of power-operated pedestrian doorsets. It covers sliding, swing, revolving, and balanced doors in both public and commercial environments.

When it comes to automatic door sensors, EN 16005 ensures that detection systems:

Recognize approaching and passing pedestrians.

Detect presence in the door’s movement path to prevent impact.

Operate reliably in various environmental conditions.

Include fail-safe mechanisms in the event of sensor malfunction.

ANSI Standards – U.S. Safety Guidelines

In the United States, the American National Standards Institute (ANSI) issues guidelines such as ANSI/BHMA A156.10 (for power-operated pedestrian doors) and ANSI/BHMA A156.19 (for low-energy doors). These standards require that:

Sensors detect individuals in the opening area before and during movement.

Detection zones adjust for different traffic patterns.

Safety devices remain functional under expected operating conditions.

Equipment is tested for durability and compliance.

Sensor Compliance in Practice

High-quality automatic door sensors on the market today are typically designed to meet or exceed both EN 16005 and ANSI requirements. Manufacturers achieve this by:

Multi-zone detection – Combining activation and safety zones in one sensor.

Self-monitoring technology – Continuously checking sensor functionality.

Wide-angle coverage – Preventing blind spots in busy pedestrian areas.

Adjustable settings – Allowing installers to customize detection fields for local standards.

It is important to note that compliance is not only about the sensor itself, but also about proper installation, calibration, and regular maintenance. Even a fully compliant sensor can become unsafe if incorrectly set up or left unserviced.

Why Compliance Matters

Legal Protection – Meeting EN 16005 or ANSI standards can help avoid liability in the event of an accident.

User Safety – Reduces the risk of door strikes or trapping incidents.

Global Market Access – Compliance ensures suitability for export to multiple regions.

Brand Reputation – Demonstrates commitment to safety and quality.

Conclusion

Yes, many modern automatic door sensors are designed to comply with EN 16005 and ANSI/BHMA standards, but compliance depends on both the product’s certification and the quality of installation. Businesses should always choose sensors from reputable manufacturers, verify certification documents, and ensure installation is carried out by trained professionals.

If you are seeking automatic door sensors that meet international safety standards, our company provides certified solutions that ensure both safety and performance for your projects worldwide.

评论

发表评论

此博客中的热门博文

Why Your Automatic Door Doesn't Fully Close – Causes and Solutions for Gaps and Sealing Issues

Automatic doors are essential in modern buildings, offering convenience, efficiency, and enhanced security. However, one common issue faced by many users is the door not closing completely. This can result in visible gaps, poor sealing, energy loss, and compromised safety. If you're experiencing this problem, you're not alone. In this article, we’ll explain the key causes and practical solutions to help you restore the full functionality of your automatic door. Common Reasons Why Automatic Doors Don't Fully Close Sensor Malfunction or Misalignment Automatic sliding doors rely on sensors to detect movement and control the opening and closing cycle. If the sensor is misaligned or malfunctioning, it may misinterpret the surroundings and stop the door prematurely, leaving a gap. Obstructions in the Door Track Dirt, debris, or foreign objects in the track can obstruct the door’s movement, preventing it from fully closing. Even small particles can cause resistance that affects al...
阅读全文

What is the typical lifespan of automatic door infrared sensors, and when should they be replaced or upgraded?

Automatic door infrared sensors are vital components in modern building access systems, offering convenience, safety, and energy efficiency. These sensors are designed to detect the presence of individuals or objects and trigger the door's opening and closing. However, like any technology, they have a finite lifespan. In this article, we will explore the typical lifespan of automatic door infrared sensors and when they should be replaced or upgraded to ensure optimal functionality and safety. The Lifespan of Infrared Sensors The typical lifespan of automatic door infrared sensors can vary based on several factors, including the quality of the sensors, environmental conditions, and the level of use. However, on average, infrared sensors are expected to function reliably for approximately 5 to 10 years. Factors Affecting Lifespan 1.  Quality and Durability: High-quality sensors made from durable materials tend to have a longer lifespan. Cheaper or poorly constructed sensors may wear ...
阅读全文

How to Solve Common Automatic Door Issues: Jerky Movement, Noise & Uneven Speed

Automatic sliding doors have become an essential part of modern commercial and residential buildings. However, users may occasionally encounter performance issues such as jerky movement during opening or closing, loud operational noise, or uneven door speed. As a leading OEM manufacturer of automatic door operators, we understand how frustrating these problems can be—and we're here to help you troubleshoot and resolve them effectively. Common Causes of Automatic Door Performance Problems 1. Dirty or Damaged Tracks and Rollers Dirt, debris, or worn-out rollers can cause the door to move unevenly or produce noise. This is one of the most common reasons for jerky door operation. Solution: Regularly inspect and clean the track. Replace worn or damaged rollers with high-quality OEM parts to ensure smooth operation. 2. Incorrect Door Alignment If the door is misaligned, it may rub against the track or side panels, resulting in noise and uneven motion. Solution: Have a qualified technicia...
阅读全文